⢠Inclined hulls and fine entry bows to benefit heading and speed
⢠Mast set farther aft with large foretriangle for balance under sail and ease of handling
⢠Good bridge-deck clearance for optimal comfort at sea
⢠Fine dagger-boards to reduce drag with electric raising and lowering
⢠Expanded loft-style living space that includes a large living room, spacious L-shaped kitchen, dedicated office and lounge area with a large sleeping berth
Integral structure manufacturing process
The hull/deck/main bulkhead joints are ensured by carbon fiber structural bonding and filleting. The entire hull/deck unit is a one-piece, non-deformable structure with exceptional stiffness and durability.
Sport structure and finish
- Hulls and deck in PVC/glass and carbon cloth sandwich infused by Vinylester resin
with anti-osmotic qualities.
- Coachroof, chainplate reinforcements and omega hull and deck reinforcements in
carbon cloth impregnated with Vinylester resin.
- Main structural bulkheads (PVC/carbon cloth sandwich) infused with Vinylester resin with monolithic UD carbon fabric angle.
- Bilges painted in light gray.
- Hull finish in gray gel coat
- Matt finish under nacelle
- Finish under nacelle leading edge and aft beam in gloss.
- White gel coat deck with integrated non-slip
- Composite dagger-boards sliding on PTFE bearings without wells
- Hull-deck joint by gluing with lamination at the stress zones (leading edge, chain plates, beam and compression beam cleats)
Mast / Rigging
- Anodized aluminum mast
- LED masthead anchor light
- Exits for mainsail halyard, solent halyard, Code 0 or Gennaker halyard and topping lift
- Combined LED steaming light/decklight
- Luff track on ball bearing slides
- Padeye for attaching lazyjacks
- Masthead wind instrument
- Anodized aluminum boom with spacers and lazy bag
- Anodised aluminum front beam with LED navigation light
- Carbon compression beam
- Solid carbon bowsprit
- Rod rigging stainless steel forestay
- Furler on forestay- 2 stainless steel 1 x 19 capshrouds
- 2 lower shrouds
-Deck hardware for spinnakers
Sails
Reinforced sails:
- 92 m2 fully battened, triradial cut, square-topped, mainsail in PRORADIAL, with 3 reefs, 6-row stitching
- Genoa in PRORADIAL, triradial cut, 6-row stitching, UV strip in same color as the lazybag
-Genaker CODETEC 95 + drum furler and rigging
Running rigging
- All running rigging returned to the helm station
- Mainsail halyard with Dyneema core
- Double mainsheet
- Solent halyard at the foot of the mast
- Code 0/Gennaker halyard led back to the steering station
- Solent sheet led back to the steering station
- Solent furling line
- 3 Reefing lines (N°1, N°2, N°3)
- 3 Reefing points (N°1, N°2, N°3)
- Boom topping lift
- 2 Flag halyards
- Adjustable foot tension
Deck hardware
Centralized fittings near the helm station
- 4 Harken Performa winches at the helm
- 2 Harken Performa winches aft of the helm for Genaker/Spinnaker
-1 Harken electric winch for tender lifting
- 3 winch cranks + cases: one case removed to accommodate EPIRB, but case still on board
-Rigging for Symm and Assym spinnakers
Mainsail:
- Double purchase, 4-line sheeting
- 2 Padeyes for mainsheet
Solent:
- 1 Sheet track forward of the mast
- 1 Track single slider for halyard tensioning
- 1 Furling line led back to the helm station with clutch
- 1 Sheet clutch
Sail maneuvers led back to the helm station:
- 3 Reefing tack clutches
- 3 Reefing line clutches
- 1 Clutch for mainsail foot tension
- 1 Main halyard clutch
- 1 Topping lift clutch
- 1 Solent clutch
Mainsail cover:
- Battened lazy bag in grey fabric and adjustable à 8 mm lazy jacks in Dyneema
Â
Anchoring
- Lofrans 1700W/12V windlass with vertical axis
-Ultra anchor and swivel + 100 m stainless chain
- Corded remote control connected in the anchor locker
- Windlass handle for manual operation
- Pivoting bow roller in stainless steel for main anchor
-Freshwater pump with outlet in anchor locker
Â
Deck equipment
- 2 Smoked plexiglass panels for access to the bow lockers
- 2 Polyester panels for engine hold access with diamond point anti-slip
- 2 Polyester panels for access to leading edge lockers with non-slip diamond edge
- 1 Roof hatch over galley in smoked plexiglass with blind and mosquito net
- Gas struts for all deck hatches
- 2 White lacquered aluminum davits with Spinlock clutches on each davit
- 2 Tender hoisting tackles with stainless steel snap shackles on dedicated winch
- 2 dagger-boards sliding on PTFE bearings and electrically operated from the helm station
-Teak lathing for transom and rear steps
-Teak lathing for cockpit and engine hatches and deck steps
-Electric davitsÂ
Â
Safety:
- Lifeline attachment points around the coachroof
- Handrails on coachroof in solid teak wood
- Handrails on the edge of the rear skirts
- High-comfort trampoline with braided mesh, lashed mesh by mesh.
- 2 Forward pulpits with white Polywood seat
- Aft railing in stainless steel tube
- 8 Stanchions
- Double Dyneema retroreflective guardwires
- 2 Gates for gangway
- 6 Large size aluminum mooring cleats
- 2 Aluminum mooring cleats inboard side of sugarscoops
Â
Coachroof top:
- 3 LED exterior ceiling lights on dimmer
- Sternlight LED
Â
Exterior equipment
- Access to the deck via GRP steps anti-slip diamond type
- 1 Bench seat lounger in the aft beam large storage locker with RTM polyester on gaz struts
- 1 Built-in bathing ladder port transom with handrail on the top of the skirt
- 1 handheld shower (hot/cold water)
-1 aluminum passerelle
- 1 passerelle socket in starboard sugarscoop
- 1 Emergency tiller access plug on each sugarscoop
- 4 Skirt step lights - courtesy LED
- Name and home port
- Batyline and pvc butt pocket under the winches at the control station
Â
Foredeck (Mast foot area)
Â
- Large anchor locker with access by locker lid on ram
- Space for life raft with automatic âCATANAâ release system and swivel hatch under nacelle.
Â
Helm stations / Rudders
-4 PERFORMA electric winches in lieu of manual winchesÂ
Helm seat with footrest + solid teak duckboard
- Helm console integrated into the roof as a backrest for the maneuvering station
- Magnetic steering compass with protective housing and lighting
- Gray fiberglass steering wheels Ǿ 1000 mm
- 2 Suspended balanced rudder blades, mounted on JP3 spherical self-aligning bearings
- 1 Emergency tiller
- Mechanical transmission steering system with Dyneema lines and ultra low friction ball bearings
- Manual engine controls at the helm station with engine instruments and alarms
Â
Sail Locker
- LED lighting
- Removable ladders fixed on the inside of the hulls.
General
Â
- Fronts of the furniture: PVC foam sandwich, laminated decor
- Laminated PVC foam sandwich floors in the hulls and PVC cladding on the nacelle
- PVC ceiling and liner linings
Â
Comfortable cockpit completely open to the outside
Â
- Saloon accessible by 4-leaf sliding door sliding to starboard with clear glazing.
- Panoramic view through 3 large forward windows and wide lateral plexiglass windows
- Ventilation through 2 large opening front bay windows and 2 side bay windows for total opening
- L-shaped seat with storage
- Folding saloon table with integrated bar for 8 people
- Dimmable recessed LED spotlights
- Courtesy lighting in the ceiling
- 2 AC outlets (220/50hz)
- Cockpit upholstery: HR 30 foam + single stitching + spradling fabrics + aeration of the covers by eyelets
-Sun protections for windows of the roof in BATYLINE
-CONFORT interior upholstery
-1 set of outdoor cushions
-1 Bimini for helm station
-Full Bimini enclosure in clear panels
Â
Raised saloon for panoramic view
Â
- Deep L-shaped seat that can act as a watchkeeperâs berth
- Coffee table
- Under-seat storage & direct access for the electrical systems : Battery converter,
switch..
- 1 reading light + dedicated switch
- Saloon upholstery: HR 30 foam + single stitching + spradling fabrics - Marlin: 4 colors to choose from + aeration of the covers by eyelets
-Blinds in salon
-Blinds in hulls
Â
Galley:
Â
- Galley with large resin countertop
- 1 stainless steel sink 11â2 bowl
- 1 Two-way tap supplying potabilized water by microfiltration (carbon filter) on one side and fresh water from tanks on the other.
- 1 selective waste bin
- Pressurized hot and cold water
- 4 AC outlets (220/50hz)
-Â Ocean Chef 3 burner induction hobb
- 1 stainless steel electric oven with grill
- Combined Fridge 267L (9.4 cu ft) + Freezer 98L (3.5 cu ft)
- Space provided for a 9-cover dishwasher + extra fridge + cellar (options)
- Dimmable LED spotlights
- Plenty of storage space:
o Pot and pan drawers under the oven
o Sliding grocery cupboard to the right of the oven
o 2 high cabinets above the cooker
o Large corner storage box with access from the cockpit sofa
o Cabinet with door under the sink
o Large cupboard with 3 shelves and 2 large drawers for cutlery + cutlery tray
o Large drawer to the left of the fridge/freezer combination
Â
Chart table:
Â
- Large chart table with instrument console
- Console for electrical switch panel
- Chart table seat on swivel
- 1 chart table reading light
- Technical access under chart table
- 1 AC outlet (220/50hz or 115/60hz)
- 1 USB outlet
Â
Ownerâs hull (Port side)
Â
- Access via wide companionway steps with the same floor covering as the hull.
- Hull closure by lockable sliding door
Â
Aft cabin owner's version:
Â
- Semi-Island bed (1,60m. x 1,90m.) with padded headboard
- One-piece bed base + hydraulic cylinders with direct access to the heater or air-conditioning
- 1 bedside tables
- 1 Large shelf with storage space on the inboard side
- 1 Drawer and multiple storage under-bunk
- 1 wardrobe + 2 cupboard with shelves
- 1 Large chest of drawers with shelves with dressing table
- 1 storage unit in the wall unit with flap
- Mirror on sliding doors
- Ventilation by hull portholes + 1 porthole in aft bay window
- Large fixed window in outboard topsides
- General lighting by LED spotlights in the ceiling with dimmer and 2 bedside reading
lights.
- 1 AC outlet (220/50hz or 115/60hz)
- 1 double USB port socket
- dimmable courtesy lighting under the bed
Owner's bathroom (3-cabin version):
- Private access from the cabin
- Built-in resin washbasin
- 1 Vanity unit high with mirror and lighting
- 3 base furniture with door
- 1 drawer under the basin
-Shower:
o Separate with glass panel and lock
o Shower column with high head and hand shower
o Storage for toiletries
o Ventilation window with blackout blind
o White plywood duckboard and bench
- Bathroom accessories (1 coat hook)
- Lighting by large fixed window
- Ventilation through hull portholes
- LED ceiling spotlight on dimmer switch
- Storage under basin
- Space for optional washing machine
- Large storage unit above the washing machine option
- 1 AC outlet (220/50hz or 115/60hz) under the sink
- Bench seat between the shower and the vanity unit
Â
Separate owner's heads compartment (3-cabin version):
Â
- Fresh-water electric W.C.
- Ceiling LED spotlight
- Porthole with blackout blind
- 1 toilet brush and toilet paper holder
Â
Guest hull (Starboard)
Â
Aft guest cabin:
- Access by door from the passageway
- Semi-Island bed (1,60m. x 1,90m.) with padded headboard
- One-piece bed base + hydraulic cylinders with direct access to the heater or airconditioning
- 1 Large shelf with storage space on the inboard side
- Storage cupboards and 1 hanging locker
- Ventilation by 2 hull portholes (in plexiglass window) + 1 porthole in fixed aft window
- General lighting by LED spotlights on dimmer and 2 bedside reading lights
- 1 AC outlet (220/50hz or 115/60hz)
- 1 x double USB outlet
- dimmable courtesy lighting under the bed
Â
Heads compartment 1-shower/1-WC version:
Â
- 1 Fresh water electric W.C.
- Toilet accessories (brush and toilet paper holder)
- 1 Large separate shower with satin plexiglass screen and ventilation via 1 hull porthole
- Bathroom accessories (1 coat hook, toiletries storage)
- LED Spotlights
- Unit with built-in basin and storage
- Wall cabinet with mirror and lighting
- 1 AC outlet in wall cabinet
Â
       Forward guest cabin:
- Access by door from the passageway
- 2 bunk beds (0,80m. x 1,90m.) + (0,75m. x 1,80m.)
o Foldable upper bunk
o Extendable lower bunk with optional duckboard
- Storage space under the low berth
- Large shelf on inboard topsides
- Storage cupboards and hanging locker
- Big Storage box with upholstery for seats
- Ventilation by hull window (on plexiglass)
- General lighting by LED spotlights on dimmer and 2 bedside reading lights
- 1 AC outlet (220/50hz or 115/60hz)
- 1 x USB outlet
- Low-level courtesy lighting
Electrical and energyHelm Station
Chart Table
Main Autopilot
Antennas/Sensors/Networks
TV and other:
Engine compartments
Â
Â
Â
Moorings Pack & Fender Fendertex® type:
Â
- 8Â fenders with black covers
- 8 fender ropes with splices
-2 large ball fenders with ropesÂ
- 5 mooring lines
Â
Â
DisclaimerThe Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.